PARKER WATTS L50-06 3/4" NPT 150 PSI PNEUMATIC INJECTOR LUBRICATOR NOS!!

Description

PARKER WATTS L50-06 3/4" NPT 150 PSI PNEUMATIC INJECTOR LUBRICATOR NOS!!
*******************************************  FREE SHIPPING!!  *******************************************
This came to us from a manufacturer and was marked as new though it does not have the original packaging (no box).  The hose and instructions are included.  It appears that the manufacturer primes the pump/lubricator since there is some oil residue but looking in the ports they are clean and appears to have  never been used (as was stated by the previous owners).
This unit comes with the L50-06 lubricator, injection tubing and the installation/operation instructions as shown.
There is no original packaging.  This is the larger 3/4" port size.
Thanks for looking!!
From the manufacturer:
L50 Single Point Injection Lubricator:
The L50 Injection Lubricator is an in-line unit for use with tools and other pneumatic equipment which require consistent lubrication for longer life and maximum torque control. These units, available in 1/2" and 3/4" NPT, deliver an adjustable amount of oil through a capillary tube inside the main airline, directly to the tool. The amount of oil is adjustable up to .03cc. These units are designed for intermittent operation. Each time the tool is cycled, the unit injects the oil through the capillary tube to the lubrication point. If the minimum amount of oil is injected per cycle is too much, than the cycle counter may be added. Or, conversely, if the amount of oil injected per cycle is not enough due to long cycle times, a pulse generator is available.
All pneumatic device designed for applications where the minimum amount of oil injected every cycle is too much. The cycle counter controls oil delivery by reducing oil injection from every air cycle, to every 5th or 10th air cycle. The cycle counter also has settings allowing the module to operate with every air cycle, or turn off to stop injector module operation.
Dependable Oil Delivery L50 In-Line Injection Lubricators provide positive oil displacement lubrication ensuring the predetermined amount of oil is delivered to the tool each and every cycle regardless of pressure or flow. For best results unit must be used with capillary line inside air outlet or with coaxial tool hoses.
Features:
• Air Flow Sensor Single point injection lubricators are installed between a filtered, regulated air source and an air supply hose going to a pneumatic tool. The body of the unit is designed to sense air flow when the tool is being used and signal the oil injector module to lubricate.
• Oil Injector Module The oil injector module provides adjustable oil delivery in amounts up to 1 drop per cycle. Oil delivery adjustment is made by turning the adjusting knob increasing or decreasing the oil piston travel in the module. Unit comes standard with oil delivery indicator
Common Applications:
• Minimal oil demands
• Short cycle times
• Small tools
• Small cylinders